Not the Biggest, Just the Best Concrete Cutting and Sawing in Alabama.

A veteran-owned, second-generation family business cutting concrete from 828 Demasters Avenue in Huntsville since 2007. Cores for new lines, doorways sawn flush, slabs up to 30 inches thick, and the work area left clean.

Call (256) 489-7514

The cut sheet

Three numbers we cut to, straight off our own spec.

Every job starts as a line on the concrete and ends as a clean edge. These are the limits we work to on commercial, industrial and residential jobs across Alabama and surrounding states. If your plans call for something else, we change to the exact spec.

See all five cuts

42ⁱⁿ

Core diameter

We will often drill up to 42 inches for the diameter and 50 feet deep, with diamond and carbide bits, and change to the exact spec your plans call for.

50^ft

Core depth

Deep runs for electric, plumbing, HVAC, phone and sewer lines, after we test that the concrete structure is safe to work on.

30ⁱⁿ

Slab thickness

Hefty riding saws cut through heavy concrete 30 inches thick. Push saws take the small slabs, inside homes and out.

Five cuts

Five ways through concrete, one family business to call.

Core drilling for new lines. Slab, wall and wire sawing for openings and removals. Demolition and hand sawing for the spots a big saw cannot reach. Each one is a different saw, and we bring the one the job needs.

Core drill rig bolted to a floor slab with a freshly pulled concrete core beside the wet hole

up to 42 in across, 50 ft deep

Core Drilling

Clean round holes through slabs and walls for electric, plumbing, HVAC, phone and sewer lines, plus drilling out existing anchors so they can be repaired, moved or replaced.

How we handle core drilling

Walk-behind flat saw running a straight wet cut down a long concrete slab in low sun

up to 30 in thick

Slab Sawing

Straight cuts through construction, demolition and remodel slabs: push saws on small pours, riding saws on concrete 30 inches thick, and gas, electric, diesel, hydraulic, propane and Soff Cut saws. Radius sawing and plunge cuts included.

How we handle slab sawing

Track-mounted wall saw on its rail cutting through a thick concrete wall with cooling water running down

flush to slab or wall

Wall Sawing

Wall sawing, also called track sawing: a track-mounted, remote-controlled saw opens concrete and brick walls for doors, windows, HVAC access and elevator shafts, cut flush and finished with a cut-n-break saw.

How we handle wall sawing

Diamond wire saw looped around a reinforced concrete pier with cooling spray on the wire

any direction, even underwater

Wire Sawing

For concrete a blade cannot reach. Steel-encased concrete, retaining walls and heavy rebar, cut by a diamond-infused wire in any direction. Minimal vibration and noise.

How we handle wire sawing

Cleanly sawn rectangular opening in a block wall with the cut-out piece set on timbers beside it

cut, lift, sweep

Demolition and Hand Sawing

Saw the line first, then take it out: patio slabs, openings and selective demolition, with hand saws for the tight spots a big saw cannot reach.

How we handle demolition and hand sawing

All five cuts

Opened up, signed off

Five Google reviews. Five stars on every one.

Our primary focus is safety in the work environment. We take thoughtful care of our client's property and make sure our workers follow all safety regulations.

Ownership: Proud veteran-owned company
Family: Local, family-owned, second-generation
Cover: Licensed and Insured
Safety: ISNetworld and TVTC
Turnaround: Very Fast Response Time
Cutting: Since 2007

Laurlee LauGoogle, 5 stars
On Friday (3/27/26, we called Osborn Concrete Cutting to get our Concrete slab patio removed. This morning the cut the slab and just finished removing the Concrete. I will recommend them.
Camel BanquetGoogle, 5 stars
Osborn Concrete Cutting has provided many years of consistent five star plus service for us. Core drills, slab cuts, inside homes and out. Always responsive, professional, clean, and reasonably priced.
Quincy WardGoogle, 5 stars
They were professional, on time, and completed the job in a reasonable amount of time. I'd recommend them for all concrete cutting needs.
Nikolas KeramidasGoogle, 5 stars
Worked with Mike who was extremely helpful and professional. He will be the first person I call for masonry work in the future!
Dexter GiffordGoogle, 5 stars
Highly pleased with clean and very professional job.

One job, start to swept floor

Cut it, lift it, haul it, sweep it.

We always leave the work area clean and free of damage. Here is what that looks like from the first wet cut to the last pass with the vac.

Close-up of a saw-cut concrete face with sliced aggregate under a film of water

Cut

Water on the blade

Diamond blades cut wet. The saw is matched to the slab and the room: gas, electric, diesel, hydraulic, propane or Soff Cut.

Lift

The piece comes out whole

Reinforced concrete is segmented and lifted out in sections, so what stays behind keeps a straight, square edge.

Backyard concrete patio saw-cut into large pieces with two sections lifted out to the gravel base

Haul

Out back, same method

A slab patio gets the same saw and the same care: cut into pieces you can lift, then carried off the yard.

Finished saw-cut doorway through a concrete wall with a steel lintel above and a swept floor

Sweep

Left clean, free of damage

Corners on a wall opening are finished with a cut-n-break saw for the lintel, and the floor is swept before we leave.

Before you call

What people ask before the saw shows up.

Still unsure which cut you need? Call (256) 489-7514, Monday to Friday, 7 AM to 5 PM, or read the story behind Osborn.

We often drill up to 42 inches in diameter and up to 50 feet deep, using diamond and carbide bits, and we can change to the exact size your plans call for. Core drilling is how electric, plumbing, HVAC, phone and sewer lines get placed through concrete.

Push saws handle small slabs, and our riding saws cut through heavy concrete up to 30 inches thick. We run gas, electric, diesel, hydraulic, propane and Soff-Cut saws, so the saw matches the slab and the setting, indoors or out.

Yes. Wall sawing uses a track-mounted, remote-controlled saw that cuts openings for doors, windows, HVAC access and elevator shafts. We cut flush with the slab or a perpendicular wall, avoid over-cuts in the corners, and finish the corners with a cut-n-break saw when a lintel is going in.

When the concrete is too strong, too large or too boxed-in for a blade: steel-encased concrete, retaining walls, heavily reinforced rebar. A diamond wire cuts by abrasion in any direction with minimal vibration and noise, and it even works underwater.

We are based at 828 Demasters Avenue NW in Huntsville and cut concrete across Alabama and surrounding states, for commercial, industrial and residential jobs.

Call (256) 489-7514 for a free estimate, Monday to Friday, 7 AM to 5 PM, or send the job details through the estimate form and we call back the same business day. We do not publish prices because every cut depends on thickness, reinforcement and access.

Free estimate

Snap the line. We'll cut it.

Tell us what needs cutting, coring or removing and roughly how thick it is. Call for a free estimate, or send the details and we call back the same business day.

Call (256) 489-7514 Send the job details

The yard

828 Demasters Avenue NW
Huntsville, AL 35801

Mon-Fri 7:00 AM to 5:00 PM

mike@osbornconcretecutting.com