Cut sheet, five cuts
Every job starts with a line on the concrete. What changes is the tool that follows it: a core bit, a flat saw, a track on the wall, a loop of diamond wire, or a hand saw in a tight spot. Here are all five, starting with the one we are asked for most.
01 / Core Drilling
42in
Often as wide as we drill a core, and up to 50 feet deep, changed to your exact specs.
Clean round holes through slabs and walls for electric, plumbing, HVAC, phone and sewer lines, plus drilling out existing anchors so they can be repaired, moved or replaced.
Core drilling is how electric, plumbing, HVAC, phone, sewer and drain lines get through a slab or a wall without cracking what is around the hole. We use diamond and carbide bits, and we can test the concrete structure to make sure it is safe to work on. Hitting rebar or a post-tension cable is the mistake nobody wants, and it is why a core is worth planning before the bit starts turning.
We always leave the work area clean and free of damage. Need an old anchor drilled out so it can be repaired, moved or replaced? Core drilling covers that too.
The rest of the index
02 / up to 30 in thick
Straight cuts through construction, demolition and remodel slabs: push saws on small pours, riding saws on concrete 30 inches thick, and gas, electric, diesel, hydraulic, propane and Soff Cut saws. Radius sawing and plunge cuts included.
Slab sawing details
03 / flush to slab or wall
Wall sawing, also called track sawing: a track-mounted, remote-controlled saw opens concrete and brick walls for doors, windows, HVAC access and elevator shafts, cut flush and finished with a cut-n-break saw.
Wall sawing details
04 / any direction, even underwater
For concrete a blade cannot reach. Steel-encased concrete, retaining walls and heavy rebar, cut by a diamond-infused wire in any direction. Minimal vibration and noise.
Wire sawing details
05 / cut, lift, sweep
Saw the line first, then take it out: patio slabs, openings and selective demolition, with hand saws for the tight spots a big saw cannot reach.
Demolition detailsWe work across Alabama and surrounding states, from our shop at 828 Demasters Avenue NW in Huntsville. Tell us what needs cutting, how thick it is and what is behind it. Estimates are free, and we can talk it through by phone first.